Regency B36X 用户手册

Regency Bellavista™ B36X Gas Fireplace

Pipe Length

Vertical

Termination

Cap

Storm Collar

Flashing

Ceiling Firestop

Rigid Pipe Adaptor

Pipe

Length

Pipe Length

90 Elbow

o

Astrocap

(946-523/P)

Wall Thimble

Vinyl Siding

Standoff (Optional)

Reducer

(4” x 6-5/8” venting)

43”

(1092 mm)

The minimum components required for a basic horizontal termination using 4" x 6-5/8" are:

 1 Rigid 

Pipe 

Adaptor

    1    Reducer 
 1 90

o

 Elbow 

 1 Wall 

Thimble

  1  Length of pipe to suit wall thickness 
    1    Horizontal Termination Cap

Wall thickness  is measured from the back standoffs to the inside mounting surface of termination cap. For siding other than vinyl furring strips may 
be used, instead of the vinyl siding standoff, to create a level surface to mount the vent terminal. The Terminal must not be recessed into siding. 
Measure the wall thickness including furring strips.

If a Vinyl Siding Standoff is required (it must be used with vinyl siding), measure to outside surface of wall without siding and add 2 inches.

The FPI AstroCap

TM 

 and FPI Riser Vent terminal are certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent

®

 Direct Vent, 

American Metal Products, Security Secure Vent

®

, AmeriVent Direct Vent. AstroCap

TM

 is the proprietary trademark of FPI Fireplace Products International 

Ltd. Dura-Vent® and Direct Vent are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

This product has been evaluated by Intertek for 
using a Rigid Pipe Adaptor in conjunction with 
DuraVent Direct Vent, Selkirk Direct-Temp, Ameri 
Vent Direct venting  and Security Secure Vent 
systems. Use of these systems with the Rigid 
Pipe Adaptor is deemed acceptable and does not 
affect the Intertek WHI listing of components.

Do not combine venting components from
different venting systems.

Exception: However, use of the AstroCap

TM

 and 

FPI Riser is acceptable with all systems.

11”

(279mm)

11”

(279mm)