Rotel RSP-1069 用户手册
33
English
Digital Stereo discs
(PCM and HDCD)
This group of recordings includes any non-Dolby
Digital 2-channel signal from the RSP-1069’s
digital inputs. You can play these recordings
in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,
7-CH Stereo modes. You can also use Dolby
Pro Logic II matrix surround (5.1 ch systems),
Dolby Pro Logic IIx Music (6.1/7.1 ch sys-
tems), Dolby Pro Logic IIx Cinema (6.1/7.1
ch systems), DTS Neo:6 surround, or one of
the DSP 1-4 modes.
Digital 2-channel signal from the RSP-1069’s
digital inputs. You can play these recordings
in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,
7-CH Stereo modes. You can also use Dolby
Pro Logic II matrix surround (5.1 ch systems),
Dolby Pro Logic IIx Music (6.1/7.1 ch sys-
tems), Dolby Pro Logic IIx Cinema (6.1/7.1
ch systems), DTS Neo:6 surround, or one of
the DSP 1-4 modes.
All of the bass management settings (speaker
size, subwoofer, and crossover) are in effect
with digital stereo inputs.
size, subwoofer, and crossover) are in effect
with digital stereo inputs.
NOTE
: In addition to the options that follow,
you can select 2-channel, Pro Logic II Cin-
ema (for 5.1 ch systems), Pro Logic II Music
(for 5.1 ch systems), Pro Logic IIx Music (for
6.1/7.1 ch systems), Pro Logic IIx Cinema (for
7.1 ch systems), 5-channel stereo, or 7-chan-
nel stereo by pressing one of the surround
mode buttons on the remote (2CH, PLC, PLM,
5CH, 7CH).
ema (for 5.1 ch systems), Pro Logic II Music
(for 5.1 ch systems), Pro Logic IIx Music (for
6.1/7.1 ch systems), Pro Logic IIx Cinema (for
7.1 ch systems), 5-channel stereo, or 7-chan-
nel stereo by pressing one of the surround
mode buttons on the remote (2CH, PLC, PLM,
5CH, 7CH).
• To select any mode for 2-channel
digital recordings. Press the SUR+ but-
ton on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
ton on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
• To select STEREO mode for 2-chan-
nel digital recordings. Press the 2CH
button on the front panel or remote.
button on the front panel or remote.
• To select Dolby multichannel modes
for 2-channel digital recordings. You
can also step through the Dolby options
(Pro Logic II, Pro Logic IIx, or 3-Stereo)
by repeatedly pressing the DOLBY PLIIx
Mode button on the front panel. You can
select Pro Logic or Pro Logic IIx Cinema
or Music modes by pressing the PLC or
PLM buttons on the remote.
can also step through the Dolby options
(Pro Logic II, Pro Logic IIx, or 3-Stereo)
by repeatedly pressing the DOLBY PLIIx
Mode button on the front panel. You can
select Pro Logic or Pro Logic IIx Cinema
or Music modes by pressing the PLC or
PLM buttons on the remote.
To change the Cinema or Music option
in Pro Logic II mode, press the SUR+ but-
ton the remote twice while in Pro Logic
II or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
ton the remote twice while in Pro Logic
II or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
• To select DTS Neo:6 mode for 2-
channel digital recordings. You can
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
To change the Cinema or Music option
in Neo:6 mode, press the SUR+ button
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
• To select DSP multichannel modes
for 2-channel digital recordings.
You can also step through the DSP op-
tions (DSP 1-4, 5CH, 7CH) by repeatedly
pressing the DSP button on the front panel.
Directly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.
You can also step through the DSP op-
tions (DSP 1-4, 5CH, 7CH) by repeatedly
pressing the DSP button on the front panel.
Directly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.
Analog Stereo
This type of recording includes any conven-
tional stereo signal from the RSP-1069’s ana-
log inputs, including analog audio from CD
players, FM tuners, VCRs, tape decks, etc.
tional stereo signal from the RSP-1069’s ana-
log inputs, including analog audio from CD
players, FM tuners, VCRs, tape decks, etc.
Analog stereo inputs require a choice about
how the signal is routed through the RSP-1069.
One option is the analog bypass mode. In
this mode, the stereo signal is routed directly
to the volume control and the outputs. It is
pure 2-channel stereo, bypassing all of the
digital circuitry. None of the bass manage-
ment features, speaker level settings, contour
settings, or delay settings are active. There
is no subwoofer output. A full-range signal
is sent directly to two speakers.
how the signal is routed through the RSP-1069.
One option is the analog bypass mode. In
this mode, the stereo signal is routed directly
to the volume control and the outputs. It is
pure 2-channel stereo, bypassing all of the
digital circuitry. None of the bass manage-
ment features, speaker level settings, contour
settings, or delay settings are active. There
is no subwoofer output. A full-range signal
is sent directly to two speakers.
The other option converts the analog inputs
to digital signals, passing them through the
digital processors in the RSP-1069. This option
allows all of the features to be active includ-
ing bass management settings, crossovers,
subwoofer outputs, contour settings, etc. In
this mode, you can select several surround
modes including 2-CH Stereo, Dolby 3-Ste-
reo, 5-CH Stereo, 7-CH Stereo modes. You
can also use Dolby Pro Logic II or Pro Logic
IIx surround, DTS Neo:6 surround, or one of
the DSP 1-4 modes.
to digital signals, passing them through the
digital processors in the RSP-1069. This option
allows all of the features to be active includ-
ing bass management settings, crossovers,
subwoofer outputs, contour settings, etc. In
this mode, you can select several surround
modes including 2-CH Stereo, Dolby 3-Ste-
reo, 5-CH Stereo, 7-CH Stereo modes. You
can also use Dolby Pro Logic II or Pro Logic
IIx surround, DTS Neo:6 surround, or one of
the DSP 1-4 modes.
NOTE
: In addition to the options that follow,
you can select Pro Logic II Cinema, Pro Logic
II Music, Pro Logic IIx Cinema, Pro Logic IIx
Music, 5-channel stereo, or 7-channel stereo
by pressing one of the surround mode buttons
on the remote (PLC, PLM, 5CH, 7CH).
II Music, Pro Logic IIx Cinema, Pro Logic IIx
Music, 5-channel stereo, or 7-channel stereo
by pressing one of the surround mode buttons
on the remote (PLC, PLM, 5CH, 7CH).
• To select Stereo or Analog bypass
mode for 2-channel analog re-
cordings. Press the 2CH button on the
remote to toggle between Stereo (with
digital processing) or Analog Bypass (no
digital processing) modes.
cordings. Press the 2CH button on the
remote to toggle between Stereo (with
digital processing) or Analog Bypass (no
digital processing) modes.
• To select any mode for 2-channel
analog recordings. Press the SUR+
button on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
button on the remote, then use the +/– but-
tons to step through the optional modes
until the desired mode is displayed.
• To select Dolby multichannel modes
for 2-channel analog recordings.
You can also step through the Dolby op-
tions (Pro Logic II, Pro Logic IIx, or 3-Ste-
reo) by repeatedly pressing the DOLBY
PLIIx MODE button on the front panel.
You can select Pro Logic or Pro Logic IIx
Cinema or Music modes by pressing the
PLC or PLM buttons on the remote.
You can also step through the Dolby op-
tions (Pro Logic II, Pro Logic IIx, or 3-Ste-
reo) by repeatedly pressing the DOLBY
PLIIx MODE button on the front panel.
You can select Pro Logic or Pro Logic IIx
Cinema or Music modes by pressing the
PLC or PLM buttons on the remote.
To change the Cinema or Music option
in Pro Logic II mode, press the SUR+ but-
ton the remote twice while in Pro Logic
II or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
ton the remote twice while in Pro Logic
II or Pro Logic IIx modes. Then, press the
+/– buttons to select the option.
• To select DTS Neo:6 modes for 2-
channel analog recordings. You can
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
also step through the DTS options (Neo:6
Cinema or Neo:6 Music) by repeatedly
pressing the DTS Neo:6 button on the
front panel.
To change the Cinema or Music option
in Neo:6 mode, press the SUR+ button
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
the remote twice while in Neo:6 mode.
Then, press the +/– buttons to select the
option.
• To select DSP multichannel modes
for 2-channel analog recordings.
You can also step through the DSP options
(DSP 1-4, 5CH, 7CH) by repeatedly press-
ing the DSP button on the front panel. Di-
rectly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.
You can also step through the DSP options
(DSP 1-4, 5CH, 7CH) by repeatedly press-
ing the DSP button on the front panel. Di-
rectly select 5CH mode by pressing the
5CH button on the remote. Directly select
7CH mode by pressing the 7CH button
on the remote.