Carson SA-400-17 用户手册
Page 8 of 12 SA-400-17 Installation and Operating Instructions
08/06/08
CP5012A
OPERATION
GENERAL
This unit is designed for easy operation under the stress associated with high-speed pursuit.
Most siren functions are accessible with one simple motion without repetitive activation of
switches or automatic timed switching that can interfere with desired operation.
Most siren functions are accessible with one simple motion without repetitive activation of
switches or automatic timed switching that can interfere with desired operation.
SELECTOR SWITCH
The 6-position rotary selector switch controls the primary oper-
ating mode of the siren.
Radio - Also known as Radio Repeat, this function amplifies a
radio speaker input for re-broadcast outside the vehicle. No
siren tones or PA operation are available in this position.
The radio must be connected and RADIO VOLUME ADJUSTed
for this mode to function.
Standby - A silent mode that maybe overridden anytime with
the Siren push-button.
Mech - A simulated mechanical siren tone used anytime.
Wail - A slower changing tone used on highways.
Yelp - A rapidly changing tone used in congested areas.
Phaser - A very rapidly changing tone used at intersections or
in highly congested areas. May be optionally replaced with
Two-Tone which is two alternating frequencies like a
European HI-LO. See OPTION SWITCHES section.
ating mode of the siren.
Radio - Also known as Radio Repeat, this function amplifies a
radio speaker input for re-broadcast outside the vehicle. No
siren tones or PA operation are available in this position.
The radio must be connected and RADIO VOLUME ADJUSTed
for this mode to function.
Standby - A silent mode that maybe overridden anytime with
the Siren push-button.
Mech - A simulated mechanical siren tone used anytime.
Wail - A slower changing tone used on highways.
Yelp - A rapidly changing tone used in congested areas.
Phaser - A very rapidly changing tone used at intersections or
in highly congested areas. May be optionally replaced with
Two-Tone which is two alternating frequencies like a
European HI-LO. See OPTION SWITCHES section.
MICROPHONE (PA Override)
The attached noise-canceling microphone is used for public address operation and overrides any
siren tone when the push-to-talk button on the side of the microphone is pressed.
siren tone when the push-to-talk button on the side of the microphone is pressed.
PA VOL
This control adjusts the PA volume. With the vehicle parked, set the PA volume
to the maximum level with no feedback (squeal).
to the maximum level with no feedback (squeal).
Rotary
Switch
Operating
Mode
Activate Siren push-button or Auxiliary Input
Radio
Radio
No Change
Standby
Silent
Horn (Default) or Manual Mech or Manual Wail or HRC2
(See SIREN SWITCH section)
(See SIREN SWITCH section)
Mech
Mech
Horn (Default) or Manual Mech (See SIREN SWITCH section)
Wail
Wail
Horn
Yelp
Yelp
Horn
Phaser
Phaser Horn
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage.
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
(Ref. OSHA 1910.95 for occupational noise exposure guidelines)
RADIO
STBY
MECH
WAIL
YELP
PHASER
PA
VOL