Yamaha TX6n 用户手册

 

By pressing a function button you can move to the screen 
indicated above that button. By pressing the [HOME] button 
you can move to the HOME screen. By pressing the [EXIT] 
button you can move to the screen one level above.

Use encoders A and B to move to the parameter that you 
want to edit, and use encoder B to edit the value.

 

• When you edit a parameter in the UTILITY screen, 

press the [ENTER] button to confirm it after you finish 
editing. A parameter that has not been confirmed will 
flash. If you move the cursor or move to a different 
screen without confirming the parameter, your change 
will not be applied.

 

When the display shows the attenuator (i.e., in the HOME 
screen or the METER screen), you can use encoders A and B 
to adjust each channel’s attenuation.

 

• If the display shows a screen other than the HOME 

screen or METER screen, encoders A and B are used 
to set parameters.

 

To display the meter, access the HOME screen and  press the 
left-most function button (METER). You can change the 
meter type by using the left-most function button (PREV) 
and the right-most function button (NEXT).

Encoder B

[ENTER] button

[EXIT] button

[HOME] button

Function buttons

Encoder A

Shows the names of the screens 
assigned to the function buttons.

Shows the contents of the 
selected screen.

Shows an alert message if a problem occurs 
or if a user-specified event occurs.

NOTE

NOTE

Attenuator

Level meter