Lucent Technologies Release 6 用户手册

DEFINITY Enterprise Communications Server Release 6
Installation and Test for Multi-Carrier Cabinets

555-230-112

Issue 5

May 1998

Test the System

Page 4-11

Test Expansion Interface Exchange for Each EPN

Test Expansion Interface Exchange for
Each EPN

Critical reliability only.

1. Verify the screen displays:

Command:

2. Enter status cabinet < 1-44> and press

Enter

. This displays the standby

expansion link (before changes are made). See

Screen 4-9

Screen 4-9.

Example of System Status Before Expansion Link is Set

3. Type set expansion-link xxxx

(where xxxx is the either 1 of the cabinet,

carrier, and port locations of the standby expansion link).

4. Verify the screen displays:

Command successfully completed

Command:

5. Enter status cabinet < 1-44> and press

Enter

. See

Screen 4-10

Screen 4-10.

Example of System Status after Expansion Link is Set

status system all-cabinets
SYSTEM STATUS CABINET 1

EMERGENCY SELECT SERVICE CABINET
TRANSFER SWITCH EXP-LINK STATE MODE TYPE
1A unavail 01A01-02A01 in standby MCC
1B auto-on 01B01-02B02 in active
-
-
Command successfully completed

Command:

status system all-cabinets
SYSTEM STATUS CABINET 1

EMERGENCY SELECT SERVICE CABINET
TRANSFER SWITCH EXP-LINK STATE MODE TYPE
1A auto-on 01A01-02A01 in active MCC
1B auto-on 01B01-02B02 in standby