Acesonic UHF-2932 用户手册

2

Receiver Description (Front)

Receiver Description (Back)

First Things First

Before installing your wireless microphone, there are a 
few things you should do and know:

• Make sure your local power outlet supplies the 
correct voltage for the AC adapter. Only use the 
adapters supplied with the system.

• Turn off  your audio system during set-up and turn 
down volume.

• Fully charge your batteries before using the system.

• Plug the power adapter cord jack into the matching 
power socket on the rear of the receiver. Make sure the 
power switch is OFF “0” and all four volume controls 
are turned down to the negative position before 
beginning any installation.

• Do not dismantle the receiver on your own. 
For needed repairs, contact your dealer

Care and Cleaning

Make sure the power is disconnected before cleaning 
the receiver unit. Use a soft cloth to clean the receiver 
and microphones. DO NOT use chemicals or any 
cleaning agents to clean the receiver or microphones.

• If you will not be using the system for an extended 
period of time, disconnect all power sources. Remove 
the batteries from microphones.

 1  Power switch / IR Sync

 2  Channel  A volume control

 3  Channel A selector

 4  Display panel

 5  IR Sync sensor

 6  Channel B selector

 7  Channel B volume control

 1  Channel B antenna connection

 2  12V AC power connection

 3  Channels A & B XLR balanced audio output     

 4  Channels A & B 1/4” unbalanced audio output

 5  Channel A antenna connection