Raritan Computer EMX2-111 用户手册
Chapter 2: Installing and Configuring the EMX Device
32
b. Plug the tag connector of the asset tag into the tag port on the
blade extension strip.
4. Repeat the above step until all blade servers in the chassis are
connected to the blade extension strip via asset tags.
5. Plug the tag connector of the blade extension strip into the closest
tag port of the asset sensor assembly or the AMS-M2-Z asset sensor
on the rack.
on the rack.
Note: If you need to temporarily disconnect the tag connector of the
blade extension strip, wait at least 1 second before connecting it back, or
the EMX may not detect it.
blade extension strip, wait at least 1 second before connecting it back, or
the EMX may not detect it.