3M MP8660 用户手册

10

E 3M 1997

3M

  Multimedia Projector MP8660

The elevation can be adjusted by turning the foot adjuster (Figure 3-16) to raise or lower the angle of the
projector.

Both adjusting feet must be raised or lowered the
same amount to project a level image on the
viewing screen.  The elevation can be adjusted
from approximately 0.4 to 7.2 degrees.

A semi-transparent screen (Figure 3-17) can be used to project an image and view it from the backside of the
viewing screen.  For this type of installation, the image must be horizontally inverted.

The projected light beam has
an off-center ratio of 80%
above and 20% below the
center of the lens.

90

Your MP8660 is now connected and ready to power on. Turn to Section 4 for details on operating the
projector.