KitchenAid KUDI01TJ 用户手册
11
Changing a Cycle or Setting
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1.
Press
CANCEL/DRAIN glows. The dishwasher starts a 2 minute
drain (if needed). Let the dishwasher drain completely.
drain (if needed). Let the dishwasher drain completely.
2.
Check the detergent dispensers. If the main wash cup has
opened and the detergent washed away, refill the cups as
needed.
opened and the detergent washed away, refill the cups as
needed.
3.
Close the door.
4.
Press a new cycle and/or options.
5.
Press START.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1.
Lift up the door latch to stop the cycle. Wait for the spraying
action to stop before opening the door.
action to stop before opening the door.
2.
Open the door. If the detergent dispenser cover is still closed,
add the item.
add the item.
3.
Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5 second pause.
the cycle after about a 5 second pause.
Option Selections
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option if desired.
change your mind, press the option again to turn the option off.
Select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to repeat the same cycle and options as the
previous wash cycle.
previous wash cycle.
NOTE:
If the last cycle you completed was a rinse cycle, when
you press Start, the dishwasher runs the last full wash cycle and
options.
options.
Hi-Temp Wash
Select this option to raise the water temperature in the main
wash, and add a rinse. The higher water temperature, and added
rinse, help clean tough soils.
wash, and add a rinse. The higher water temperature, and added
rinse, help clean tough soils.
This option adds heat, water and wash time to the cycle.
NOTE:
Hi-Temp Wash is an option with the Heavy and Normal
cycles.
Energy Saver Dry
Select this option to dry dishes without heat and save energy.
Energy Saver Dry is useful when loads contain plastic dinnerware
that may be sensitive to high temperatures.
Energy Saver Dry is useful when loads contain plastic dinnerware
that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE:
Rinse Only automatically uses this option. Energy Saver
Dry is an option with all other cycles.
Control Lock
Use Control Lock to prevent your dishwasher from accidentally
being turned on. Use Control Lock, also, to prevent accidental
cycle or option changes during a cycle.
being turned on. Use Control Lock, also, to prevent accidental
cycle or option changes during a cycle.
When CONTROL LOCK is lit, all buttons are disabled.
NOTES:
■
The dishwasher door can be opened while the controls are
locked.
locked.
■
You can turn on the Lock while the dishwasher is running.
To turn on the Lock
Press and hold
Press and hold
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher is locked, the light
flashes 3 times.
flashes 3 times.
To turn off the Lock
Press and hold ENERGY SAVER DRY for 4 seconds. The light
turns off.
turns off.
Status Indicator
Water Heating
WATER HEATING glows, and the cycle progression pauses,
whenever water is heated during a cycle.
whenever water is heated during a cycle.
Wash or rinse action continues as the water heats.