GE PVB67 用户手册

Plug power cord into properly grounded receptacle.

painted or Stainless Steel Surfaces
To clean the stainless steel or painted surfaces,  

use warm, sudsy water or a stainless steel cleaner 

or polish.
The filters should be washed by hand. Do not clean 

filters in the dishwasher.

• Press and hold the ON/OFF pad on the control  

to raise the vent.

• Slip fingers into the vent holes. Lift the vent 

straight up and then down. 

• Slide filter into the retainers and close the vent.
• Press the Fan Speed hIGhER pad to start the 

blower. Adjust the blower by pressing hIGhER or 

LOWER. The blower, if left on, will automatically 

turn off when the vent is lowered.

NoTe: It is not necessary to turn the fan OFF 

before lowering the vent. The fan will automatically 

turn off when the vent is lowered.  When the fan 

is not turned off before lowering the vent, it will 

automatically come on at the previously set speed 

when the vent is fully raised.

To lower the vent, press the ON/OFF pad.

IMpoRTANT: The vent can be activated by pressing 

the pads on the switch. Do not use excessive force 

or sharp objects to activate the switch. Damage 

could occur and void the warranty.

Filter Tabs