Raymarine D7637-1 用户手册
User Guide
27
Q. What should I do when the safety alarm sounds?
The safety alarm will sound when the pilot switches to STANDBY as a safety
precaution.You MUST take the helm.
precaution.You MUST take the helm.
The safety alarm will sound when the pilot is in control of your boat, and:
•
the S1000 loses contact with all of its connected controllers
or
or
•
when the S1000 stops receiving valid GPS information.
General maintenance
Routine checks
The S1000 computer and S100 controller do NOT contain user-serviceable
parts. If you remove the main cover you will invalidate the warranty. It
should be serviced only by authorized Raymarine service technician.
parts. If you remove the main cover you will invalidate the warranty. It
should be serviced only by authorized Raymarine service technician.
As a result, user maintenance is limited to the following checks
•
make sure all cable connectors are firmly attached and free of
corrosion
corrosion
•
examine for signs of wear or damage – replace any damaged
cables
cables
•
replace batteries when necessary
Cleaning the S1000 and S100
Take care when cleaning the display. Avoid wiping the display screen with a
dry cloth as this could scratch the screen coating. If necessary, only use a
mild detergent.
dry cloth as this could scratch the screen coating. If necessary, only use a
mild detergent.
Never use chemical or abrasive materials to clean the computer or
controller. If it is dirty, wipe it with a clean, damp cloth.
controller. If it is dirty, wipe it with a clean, damp cloth.
81245_4.book Page 27 Monday, April 30, 2007 6:03 PM