Standard Horizon GX3000S 用户手册
Page 65
GX3000S
12.12 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default
name.
name.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
CH Name
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select the chan-
4. Turn the CHANNEL selector knob to select the chan-
nel to be named, then press the [ENT] key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the channel name.
6. Press the [ENT] key to store the first letter in the name
and step to the next letter to the right.
7. Repeat step 6 and 7 until the name is complete. The
name can consist of up to twelve characters, if you
do not use all twelve characters press the [ENT] key to move to the next
space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press
the [CLR] key.
do not use all twelve characters press the [ENT] key to move to the next
space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press
the [CLR] key.
8. Press and hold the [ENT] key to save the name.
9. If you want to enter the name of another channel,
9. If you want to enter the name of another channel,
select “
Next
” then press the [ENT] key. Otherwise,
select “
Exit
” then press the [ENT] key.
10. To exit this menu and return to radio operation mode
press the [16/9] key.