Standard Horizon GX3000S 用户手册
Page 67
GX3000S
12.14 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [CALL(MENU)] key until
“
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
FOG Freq.
” in the
“
Radio Setup
” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select desired
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
6. To exit this menu and return to radio operation mode
press the [16/9] key.
12.15 RECEIVER AUDIO TONE CONTROL
Allows the treble and bass of the speaker audio to be adjusted for best listening
in noisy enviroments. The effect is similar to adjusting a the treble and bass
controls on a stereo.
in noisy enviroments. The effect is similar to adjusting a the treble and bass
controls on a stereo.
1. Press and hold down the [CALL(MENU)] key
until “
Radio Setup
” menu appears.
2. Press the [ENT] key, then select “
TONE CONT.
”
in the “
Radio Setup
” menu with the CHAN-
NEL selector knob.
3. Press the [ENT] key, then select “
BASS
” with
the CHANNEL selector knob.
4. Turn the CHANNEL selector knob to select de-
sired audio responce in the lower frequency
range. Available selections are “
range. Available selections are “
–6
” through “
+6
.”
5. Press the [ENT] key to store the selected setting.
6. Select “
6. Select “
TREBLE
” with the CHANNEL selector
knob.
7. Turn the CHANNEL selector knob to select de-
sired audio responce in the highr frequency
range. Available selections are “
range. Available selections are “
–6
” through “
+6
.”
8. Press the [ENT] key to store the selected setting.
9. To exit this menu and return to radio operation mode press the [16/9] key.
9. To exit this menu and return to radio operation mode press the [16/9] key.