Philips AMC 60 用户手册

The following tools are needed 
for installation.

1.    Level
2.    Hole Saw
3.    Core bits
4.    Hammer
5.    Drill
6.    Torque wrench
7.    Adjustable wrench
8.    Flat head screwdriver
9.    Philips head screwdriver
10.  Wire stripper
11.  Measuring tape
12.  Ratchet set
13.  Flaring tools
14.  Tube cutter

The following materials are 
required:

1.  Correct size copper tubing
2.  Correct size drain pipe
3.  Sleeve and bush
4.  Vinyl tape
5.  Saddle & Clamps to support
     refrigerant piping
6.  Power supply cable
7.  Insulation material
8.  Putty or similar sealant

Installation and servicing of air conditioner can be hazardous due to high refrigerant pressure 
and electrical components inside the unit.  Only fully trained, qualified and certified service 
personnel should install, repair and service the air conditioner.

While working on the air conditioner, all precautions in the literature, tags and labels attached to 
the unit and all other general safety precautions should be carefully observed.  Please follow all 
safety codes, wear safety glasses and work gloves.  Also use quenching cloth for brazing 
operations.

It is highly recommended that this manual be read completely before installing and operating the 
system.

The main power breakers to the unit , including its accessory or 

parts, should be turned off before performing service or maintenance operations 
on the unit.  Dangerous high voltage can cause electric shock, serious personal 
injury or even death.