Philips AMC 60 用户手册
SELECTION OF LOCATION
Select a convenient location where:
INDOOR UNIT
!
The cool air can reach every corner of the
area to be cooled.
area to be cooled.
!
The unit is away from any direct heat
source
source
!
Easy and short routing of the refrigerant
and drain pipes to the exterior.
and drain pipes to the exterior.
!
There are no flammable gas, alkaline or
acid present in the air.
acid present in the air.
!
Air circulation is not obstructed, preventing
good air circulation.
good air circulation.
!
The structure where the unit is installed
should be strong enough to support the
weight of the unit and also prevent any
vibration during operation of the unit.
should be strong enough to support the
weight of the unit and also prevent any
vibration during operation of the unit.
!
Figure on the right shows the spacing to the
nearest wall.
nearest wall.
OUTDOOR UNIT:
!
The condensing unit should be located as
close as possible to the fan coil.
close as possible to the fan coil.
!
The air inlet shall be located at least 4” from
the wall or other obstruction for unrestricted
airflow.
the wall or other obstruction for unrestricted
airflow.
!
The air outlet shall be located so as to
direct discharged warm air away from the
building. (Avoid low overhanging roofs to
avoid re-circulation of condenser discharge
air on vertical discharge models.)
direct discharged warm air away from the
building. (Avoid low overhanging roofs to
avoid re-circulation of condenser discharge
air on vertical discharge models.)
!
Mount the unit on a sturdy base.
!
Figure on the right shows the spacing to be
provided.
provided.