Quantum acl 4 安装指导

Chapter 2 Unpacking the Library
Removing Internal Packing and Inserting Tape Cartridges

12

ACL 4/52 Facilities Planning and Installation Guide

Figure 10  Removing the 
Left Panel

2

To remove the tie-wraps:

Do not cut the tie-wraps; they must be reused when packaging the 
library for reshipment.

1 Use an antistatic wrist strap and take any other available antistatic 

precautions.

2 Using figure 11, locate tie-wraps securing the horizontal carriage, 

the vertical carriage, and extension axis.

3 To remove each tie-wrap, push on the release tab near the tie-wrap 

buckle and then slide the end of the tie wrap out of the buckle.

Repeat this step until you have removed all three tie-wraps.

4 Save all tie-wraps for future use.

TA00137a