KitchenAid kdrp462lss 用户手册

下载
页码 52
10
Sealed Surface Burners
IMPORTANT: Do not obstruct the flow of combustion and 
ventilation air around the burner grate edges.
Before cleaning, make sure all controls are off and the oven and 
cooktop are cool. Do not use oven cleaners, bleach or rust 
removers.
Burner cap: Always keep the burner cap in place when using a 
surface burner. A clean burner cap will help prevent poor ignition 
and uneven flames. Always clean the burner cap after a spillover 
and routinely remove and clean the caps according to the 
“General Cleaning” section.
Gas tube opening: Gas must flow freely throughout the gas tube 
opening for the burner to light properly. Keep this area free of soil 
and do not allow spills, food, cleaning agents or any other 
material to enter the gas tube opening. Protect it from spillovers 
by always using a burner cap. 
Burner ports: Check burner flames occasionally for proper size 
and shape as shown above. A good flame is blue in color, not 
yellow. Keep this area free of soil and do not allow spills, food, 
cleaning agents or any other material to enter the burner ports.
To Clean:
1. Remove the burner cap from the burner base and clean 
according to “General Cleaning” section.
2. Clean the gas tube opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown. Do 
not enlarge or distort the port. Do not use a wooden 
toothpick. If the burner needs to be adjusted, contact a 
trained repair specialist.
4. Replace the burner cap, making sure the alignment pins on 
the cap are properly aligned with the burner base.
5. Turn on the burner. If the burner does not light, check cap 
alignment. If the burner still does not light, do not service the 
sealed burner yourself. Contact a trained repair specialist.
Simmer Plate
The Simmer Plate is made of aluminum to evenly spread the heat 
over the bottom of cookware. It can be used on the large surface 
burners.
For best results, use the Simmer plate with burner settings in the 
medium to low range on the cooktop when lower temperatures 
are needed for simmering, or for maintaining food at a low 
temperature over an extended period of time.
Channels on the bottom of the Simmer Plate have been designed 
so it fits properly and securely over the grate (as shown).
See “Assistance or Service” section to order extra Simmer 
Plates.
1. Burner cap
2. Burner base
3. Alignment pins
4. Igniter
5. Gas tube opening
1. 1-1
¹⁄₂
 in. (25-38 mm)
2. Burner ports
1
2
4
5
3
2
1
1. Incorrect
2. Correct
1
2