Frigidaire fpcf3091lf 用户指南

16

The two induction cooking zones available on the cooktop

require a minimum pan size to be used at each location.

The smaller inner ring on each cooking zone (See Fig. 1) is

your guide to the correct minimum pan size for that zone.

The pan bottom must fully cover the inner ring for proper

cooking to occur.

If a pan made of correct material is centered properly on

any of the active cooking zones but is too small, the

affected cooking zone display will flash and the pan will not

heat until a larger pan that covers the inner ring is used.

125 mm

min.

Cookware bottom should

not exceed ½” (13mm)

from outer cooking zone

rings.

180 mm

min.

Pan sensing-induction cooking zones (cont’d)

The thicker outer ring at each cooking zone is helpful to

determine the pan maximum size. After centering the

cookware on the cooktop induction zone, be sure the

cookware does not extend more than 1/2” (13mm) beyond

the outer circle for the zone (See Fig. 1). The pan must

make full contact on the ceramic surface without the bottom

of the pan touching the metal cooktop edges.

Induction cooking zones minimum pan size requirements

Fig. 2

Your cooktop has two induction cooking zones that share

the same power inverter.  If the user places cookware on

both induction cooking zones and attempts to set hi power

levels for both, one cooking zone position will automatically

lower slightly.

For example, if you are heating items using both cooking

zones at the same time, the last cooking zone power level

set will be maintained, while the first cooking zone set may

experience a slight reduction in the power level setting (See

Fig. 2). This is called power sharing.

To avoid a power level change due to power sharing,

always set the power level for the cooking zone you

would prefer to maintain last.

Fig. 1

Induction

cooking

zones

only