3M scp716w 安装指导

Assembly and Installation Guide 

3M™ SCP700 Series Mobile Stand

 

Step 1.  Route cables through stand as shown.

Step 2.  Connect the power and audio cables to

the connections inside the cover.

Step 3.  Slide the cover over the arm. Attach the power 

and audio cables to the existing cable bundle 

using a cable tie. Leave 10–12 inches (250–

300mm) slack cable.

Step 4.  Attach the cover to the base.

To reduce the risk of hazardous  

voltage: Do not stuff excess cables 

under the wall mount cover.

Step 6.  Install the long mounting screws M5 x 35mm 

through the leveling screws and tighten securely.

Attaching to the Stand, continued

10-12 inches

(250-300mm)