3M scp716w 安装指导

Assembly and Installation Guide 

3M™ SCP700 Series Mobile Stand

 

Step 1.  Unpack the base of the cart. Place the 

base on a flat surface. 

The locking casters must always be installed on the rear of the base.

Step 2.  Turn the base over and lie it on the

ground.

Step 3.  At the corner of each leg is a threaded

mounting point for the caster wheels.

Step 4.  Thread the caster into the threaded 

mounting point and tighten with the  

supplied wrench.

Step 5.  Once the caster wheels have been 

tightened, turn the base back over.

Step 6.  Lock the two rear caster wheels for the 

remainder of the installation.

Base

Prior to placing the components on a flat surface, it is strongly recommended that a blanket, or packing 

cloth, be placed on the surface to prevent the components from being scratched and/or marred during 

the assembly.

Step 1.  Remove the back plate support from the packaging and place it on a flat surface.

Step 2.  Remove the gas shock from the packaging.

Step 3.  Thread the shock bracket onto the bottom of the gas shock. 

Step 4.  Rotate it clockwise until it is securely fastened to the gas shock.

Step 5.  Place the threaded tip of the gas shock into the mounting point on the back plate support.

Step 6.  Turn the gas shock clockwise to thread the tip into the mounting point. Rotate the gas shock until it is seated 

firmly in the back plate support.