LG F1496QDW3 用户指南

If the floor is uneven, turn the adjustable feet as required 
(Do not insert pieces of wood etc. under the feet). Make 
sure that all four feet are stable and resting on the floor 
and then check that the appliance is perfectly level (Use 
a spirit level).
•

Once the washing machine is level, tighten the lock 
nuts up towards the base of the washing machine. All 
lock nuts must be tightened.

Raise

Lock Nut

Lower

Tighten all 4  

locknuts securely

•

Diagonal Check  
When pushing down the edges of the washing 
machine top plate diagonally, the washing machine 
should not move up and down at all (Check both 
directions). If the washing machine rocks when 
pushing the machine top plate diagonally, adjust the 
feet again.

•

Timber or suspended type flooring may contribute 
to excessive vibration and unbalance.

•

If the washing machine is installed on a raised 
platform, it must be securely fastened in order to 
eliminate the risk of falling off.

•

Water supply pressure must be between 0.1 MPa and 
1.0 MPa (1.0‒10.0 kgf/cm

2

).

•

Do not strip or crossthread when connecting inlet hose 
to the valve.

•

If the water supply pressure is more than 1.0 MPa, a 
decompression device should be installed.

•

Periodically check the condition of the hose and 
replace the hose if necessary.

Two rubber seals are supplied with the water inlet hoses.
They are used for preventing water leaks. Make sure the 
connection to taps is sufficiently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

,