LG F1496QDW3 用户指南
36
Error Messages
Symptoms
Reason
Solution
Water supply is not adequate in
area.
area.
•
Check another tap in the house.
Water supply taps are not
completely open.
completely open.
•
Fully open tap.
Water inlet hose(s) are kinked.
•
Straighten hose(s).
The filter of the inlet hose(s) are
clogged.
clogged.
•
Check the filter of the inlet hose.
If water leakage occurred in
the inlet hose, indicator ‘ ’ will
the inlet hose, indicator ‘ ’ will
become red.
•
May vary depending on the model.
Drain hose is kinked or clogged.
•
Clean and straighten the drain hose.
The drain filter is clogged.
•
Clean the drain filter.
Load is too small.
•
Add 1 or 2 similar items to help balance
the load.
the load.
Load is out of balance.
•
Add 1 or 2 similar items to help balance
the load.
the load.
The appliance has an imbalance
detection and correction system.
If individual heavy articles are
loaded (e.g. bath mat, bath
robe, etc.) this system may stop
spinning or even interrupt the
spin cycle altogether.
detection and correction system.
If individual heavy articles are
loaded (e.g. bath mat, bath
robe, etc.) this system may stop
spinning or even interrupt the
spin cycle altogether.
•
Rearrange load to allow proper spinning.
If the laundry is still too wet at
the end of the cycle, add smaller
articles of laundry to balance the
load and repeat the spin cycle.
the end of the cycle, add smaller
articles of laundry to balance the
load and repeat the spin cycle.
•
Rearrange load to allow proper spinning.
,