Honeywell RTH8500 用户指南
33-00133EF—01
10
Installing your thermostat
11 Set date and time.
Touch
s
or
t
buttons to change
displayed time and date.
Press and hold a button to quickly
change a setting.
change a setting.
Note:This
thermostat will
automatically update for daylight
saving time (if observed in your area)
and all date/time information is stored.
If the thermostat is connected to
Wi-Fi and registered to Total Connect
Comfort, the current time is updated
from the internet.
saving time (if observed in your area)
and all date/time information is stored.
If the thermostat is connected to
Wi-Fi and registered to Total Connect
Comfort, the current time is updated
from the internet.
Day
Time
Month
Year
12 Determine your heating/cooling system type.
Important!
Heating/cooling system type must be set so that your
thermostat operates properly and does not damage your system.
12a
If you have a traditional system (natural gas forced air with A/C),
your hermostat is set up by default to control this system.
your hermostat is set up by default to control this system.
12b
If your system is:
• Conventional multistage heat and cool
• Any type of heat pump
• Hydronic
• Other
• Any type of heat pump
• Hydronic
• Other
You MUST change the system type by setting system function 0170.
See page 22 to match your thermostat to your system type.
See page 22 to match your thermostat to your system type.
If you are not sure of your
heating/cooling system type
or have other questions,
go to wifithermostat.com
heating/cooling system type
or have other questions,
go to wifithermostat.com
MORE
Inside
MCR3158
0
Heating/cooling system not turning
on? Refer to page 26 or FAQ at
wifithermostat.com/support
on? Refer to page 26 or FAQ at
wifithermostat.com/support
Congratulations! Your thermostat is operational.
13 Test your thermostat.
13 Test your thermostat.
13a Press the
SYSTEM
button to change to
heating or cooling and begin operation.
13b For remote access to your thermostat,
continue to
“Connecting to your Wi-Fi
network” on page 11.