Honeywell RTH8500 用户指南

Connecting to your Wi-Fi network

If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup 

page:

•  Try performing a network rescan by pressing the Rescan button. This is helpful in 

areas with a lot of networks.

•  If you are connecting to a hidden network, then enter the network SSID in the 

textbox, select the encryption type from the drop down menu, and click on the 
Add button. This manually adds the network to the top of the list. Click on the new 
network in the list and enter the password if necessary. Click on Connect to join the 
network.

3  Make sure your thermostat is connected.

The message center on your thermostat will 
now display CONNECTING… for up to 30 
seconds.

Look at the thermostat display. Verify that the 
message center displays one of the following:

CONNECTION SUCCESSFUL
JOINED: [WI-FI NETWORK NAME]
YOU ARE ALMOST DONE
REGISTER AT TOTAL CONNECT

If you see one of these messages, continue on page 12.

If you see CONNECTION FAILURE or Wi-Fi SETUP in the  

message center, confirm you correctly entered your home network  
password in step 2c. If correct, refer to the FAQ at wifithermostat.com/support

M31568

MORE

Registering your thermostat online

M31570

To view and set your Wi-Fi thermostat 
remotely, you must have a Total Connect 
Comfort account. Use the following steps.
1  Open the Total Connect Comfort web site.

Go to mytotalconnectcomfort.com

View the Wi-Fi Thermostat Registration 
video at wifithermostat.com/videos