Bosch TES-50621 RW 用户手册

Robert Bosch Hausgeräte GmbH

4.  Select the required drink by turning the 

upper rotary knob (15) (only one cup 

possible).

5.  Press the 

start button (10).

The coffee is brewed and then dispensed 

into the cup.

N.B.: Repeat the procedure for another 

cup of coffee. If no coffee is taken within 

90 seconds, the brewing chamber empties 

automatically to avoid overfi lling. The appli-

ance rinses. 

¡

¡

The milk frother (6) gets very hot. Hold the 

milk frother (6) by the plastic part only.

The appliance must be ready for use.

1.  Place the pre-warmed cup or glass un-

der the outlet of the milk frother (6).

2.  Set the rotary selector (6b) to the 

horizontal position.

3.  Press and hold the 

h

 / 

g

 button (12) 

for approx. 3 seconds. The appliance 

heats up. Hot water runs out of the milk 

frother outlet (6) for about 40 seconds.

4.  Press the 

h

 / 

g

 button (12) again to 

cut the process short.

¡

¡

The milk frother (6) gets very hot. Hold the 

milk frother (6) by the plastic part only.

Tip: You can foam the milk fi rst and then 

dispense coffee, or foam the milk separately 

and pour it onto the coffee.

The appliance must be ready for use.

1.  Place a pre-warmed cup under outlet 

(6a).

2.  Insert the milk tube (6c) into a milk 

container.

3.  Turn the rotary selector (6b) to “Milk 

froth” 

j

 or “Warm milk” 

i

.

4.  Press the 

h

 / 

g

 button (12).

The 

h

 / 

g

 button (12) fl ashes and the 

appliance now heats up for approx. 20 

seconds. 

¡

¡

Milk froth or warm milk comes out of the 

milk frother (6) at high pressure. Splashes 

of milk can scald. Do not touch the outlet 

(6a) or aim it at anyone.

5.  End the process by pressing the 

h

 / 

g

 

button (12).

Tip: For optimal milk froth quality, use cold 

milk with a fat content of at least 1.5 % if 

possible.

TES506_1RW.indb   10

16.06.2011   13:51:07