Bosch TES-50621 RW 用户手册

下载
页码 124
12
Robert Bosch Hausgeräte GmbH
en
Dismantling the milk system for cleaning:
1.  Pull the milk frother (6) forward out of 
the appliance.
2.  Dismantle the milk frother into its indi-
vidual parts (6a) to (6d) (see 
fi gure C at 
the start of the operating instructions).
3.  Clean the individual parts with a deter-
gent solution and a soft brush. If neces-
sary, soak in a warm detergent solution.
4.  Rinse all parts with clear water and dry 
them.
5.  Reassemble all the parts and replace 
fully in the appliance.
¡
¡
Risk of scalding
Use this appliance only after the milk frother 
(6) has been fully assembled and installed.
 Cleaning the brewing unit
Clean the brewing unit regularly!
To pre-clean the brewing unit automatically:
1.  Select 
e
 by turning the rotary knob (15).
2.  Place an empty glass under outlet (6a).
3.  Press the 
start button (10).
The appliance rinses. 
In addition to the automatic cleaning pro-
gramme, the brewing unit (5a) should be 
removed regularly for cleaning. (See 
fi gure 
E at the start of the operating instructions.) 
1.  Switch the appliance off at the power 
on/off switch 
O / I (9). No buttons are lit.
2.  Open the door (5b) to the brewing unit.
3.  Slide the red lock (5e) on the brewing 
unit completely to the left.
4.  Press the red button (5d), grasp the 
brewing unit by the recessed grips and 
remove carefully.
5.  Rinse the brewing unit (5a) thoroughly 
under running water.
 
Important: Do not clean with detergent or 
other cleaning agents and do not put it in 
the dishwasher.
6.  Wipe out the inside of the appliance 
thoroughly with a damp cloth and re-
move any coffee residues.
7.  Allow the brewing unit (5a) and the in-
side of the appliance to dry.
8.  Reinsert the brewing unit (5a) fully into 
the appliance.
9.  Slide the red lock (5e) fully to the right 
and close the door (5b).
TES506_1RW.indb   12
16.06.2011   13:51:08