alohabob pc relocator ultra contro 用户手册

PC Relocator Ultra Control User Guide 

65 

 

 

 

 

 
It is easiest to perform a PC-to-PC relocation with two 
monitors. Since this is the most common setup, the 
instructions below assume that you have a monitor on 
each PC and that you can conveniently go back and 
forth between the PCs. 
 
However, if you have just one monitor to share between 
the two PCs, you may find it inconvenient to switch the 
monitor back and forth after each step. If you wish, you 
can minimize switching the monitor by rearranging the 
steps as follows: 
 
If you have the box version of PC Relocator Ultra Control 
and if only one PC has a CD-ROM or DVD drive, 
connect the monitor to the PC with the CD-ROM/DVD 
drive and use the PC Relocator Ultra Control installation 
CD to create installation diskettes for the other PC (see 
the Setup section for instructions). 
 
If you purchased the downloadable version of PC 
Relocator Ultra Control, connect the monitor to the PC 
where you downloaded PC Relocator Ultra Control and 
create installation diskettes for the other PC (see the 
Setup section, below, for installation instructions). 
 
Connect the monitor to the Old PC and follow the Setup 
and Select instructions. When the Old PC's screen 
displays Waiting for New PC to connect, you are finished 
on the Old PC. 
 
Connect the monitor to the New PC and follow all 
instructions, starting with the Setup topic.