avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
Page 42 – 3. Controlling dimmers and fixtures
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
playback making some lights green, then you select the lights
and change them to red. If you press Clear with this option set
to [Freeze] then the lights remain red. If the option is [Release]
the lights will go back to green.
You can use the Channel Grid window to selectively attributes from
3.1.4
Changing attributes using the wheels
“Attributes” are the functions of the fixture, like pan, tilt, colour,
dimmer, etc. You select which attributes you want to modify using
the buttons on the right edge of the
console and set values using the
wheels at the bottom of the Pearl.
The attributes available depend on
the fixture type. Dimmer channels
only have a dimmer attribute.
Note: If you are using the Touch
Wing, see the next section.
Each attribute button controls two
attributes, one on the left wheel and
one on the right wheel.
1> With some fixtures selected,
press the button for the
attribute to be changed
2> Turn the wheels to set the attribute. The display above the
wheels shows which attributes are being controlled, and the
settings which are available scroll up and down as you turn the
wheels.
3> Repeat from 1 to change
other attributes of the
selected fixtures.
Some other things to know
about attributes:
•
If an attribute is in the
programmer, it is inverted
(as shown with the
“Green” setting in the
screen picture here). This
provides a quick way to
see if attributes are in the
programmer or not.
•
The Attribute buttons let
you select the attribute to
set. You can also select
the attribute from the
softkeys by pressing the
“Attribute Banks” button.
•
If the display above the wheels does not show the attribute
when you press the button, that attribute is not available on the
selected fixtures.
Attribute select buttons
Control wheels