avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
Page 54 – 4. Palettes
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
•
You can also recall a palette from any page using its number by
doing the following:
1> Select some lights
2> Press the Palette button above the numeric keypad
3> Type in the number of the palette you want to recall.
4> Press Enter or [Apply Palette]
2> Press the Palette button above the numeric keypad
3> Type in the number of the palette you want to recall.
4> Press Enter or [Apply Palette]
4.2.3
Quick palettes with no fixtures selected
If you press a palette button when no fixtures are selected, the
palette will be set to all the fixtures the palette applies to. This is
called a Quick Palette. For example if you’ve got some colour palettes
programmed for your MAC 2000’s, pressing one of the palettes when
no MAC 2000’s are selected will set the colour to all the MAC 2000’s.
4.2.4
Setting palettes to fixtures in a playback
You can apply a palette to all fixtures in a particular playback. Hold
down the palette key and select the playback which the palette is to
apply to. You can only use this function with palettes which have
been assigned to a handle button.
4.3
Edit
4.3.1
Editing palettes
To edit a palette entry, press the Update Palette button, select the
palette to edit (this will automatically select the fixtures used in the
palette), make the changes you want, then press the [Update Palette
x] softkey to save the changes.
The Update Palette button also allows you to change the palette name
The Update Palette button also allows you to change the palette name
and number.
You can also load the palette into some fixtures, modify the attributes
You can also load the palette into some fixtures, modify the attributes
and record the new information back on top of the existing palette
entry. The Tiger Touch will give you options on the softkeys to
Replace or Merge the palettes. If you select Merge, anything you
haven’t changed will not be affected, values you have changed or
added will be amended.
•
You can set the console to “Always Merge” (so it doesn’t ask
you) using option A of the User Settings (hold down the Avo
button to set these). You can also press the palette button a
second time to select the Merge option.
•
You can add additional fixtures to a palette without affecting
existing ones. For example, if you have colour palettes for Mac
600s, you can add colours for your Mac 500s without affecting
any previously recorded values in the palette.
•
You can remove attributes from palettes using the Off function,
•
When editing a palette, the state of the programmer will be
preserved; when the modified palette is saved, your original
programmer contents will be restored and the programmer will
be left in the same state as when you started editing the
palette.