avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
Page 52 – 4. Palettes
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
positions, each fixture will have a different setting.
4.1.3
Storing a palette
This is how you save a palette value:
1> Press Clear to clear the programmer.
2> Select the fixtures for which you want to store palette values.
3> Using the attribute buttons and wheels, set the attributes you
2> Select the fixtures for which you want to store palette values.
3> Using the attribute buttons and wheels, set the attributes you
want in the palette entry. You can store any or all attributes of
a fixture in each palette entry.
4> Press the blue Store Palette button
5> Select which attributes are to be recorded in the palette using
5> Select which attributes are to be recorded in the palette using
the Attribute Bank buttons – anything lit up will be saved. This
is called the palette Mask. It’s best to save only one type of
attribute (e.g. Tilt/Pan). Softkeys D and E also controls the
Mask (see below).
6> All unused Palette buttons will flash. Press a grey preset Palette
button to store the palette, or touch an empty touch button on
the Touch Wing. Or enter a palette number and press F [Store]
•
The console will automatically set the palette as
Shared or Normal (by checking if the values to
be stored are the same across all fixtures of the
same type). A “magic wand” icon on the softkey
indicates automatic setting. You can override
the setting by pressing the softkey C, in which
case a “user” icon is displayed to indicate a user
locked state.
•
[Set Mask] allows you to
specify which attribute
groups will be included in
the palette. You can also
use the grey Attribute
Bank buttons on the right
hand edge of the console
to set the mask.
An attribute group is
included when the softkey
is inverted (like the Colour
group in the picture) and
when the LED is lit on the
Attribute Bank button.
•
[Record By…] allows you
to control how the mask is
used when saving the
palette. The options are:
[Channel in programmer]
records only channels
which are in the programmer (which have been changed)
[Group in programmer] records all channels in any attribute
group which has one or more channels in the programmer. For
example if Cyan is in the programmer, all colour channel
settings will be recorded even if not in the programmer.
[Group in mask] records everything included by the mask set
on the attribute buttons