avolites pearl expert titan 用户手册

Copyright Avolites Limited 2010

6. Cues - Page 75

PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00

select touch buttons.

7> Press Exit to finish.

•

You can set several fixtures to have the same sequence

number. This means, for example, when used with Overlap they

will all do the same thing at the same time.

•

You can remove a fixture from the sequence by giving it the

same sequence number it already has. The fixture sequence will

show X. Touch

the button again

to put it back in

the sequence.

On the Touch Wing

the fixture sequence

is shown on the touch

button as shown in

the picture on the

right.

6.6.3

Setting attribute fade times for a cue

You can set individual fade times for each attribute group (such as

Position). If you set a time, it overrides the normal times.
To set an attribute group fade time:

1>  Press [Edit Times] at the top level menu.
2>  Press the Swop button of the cue to be changed.
3>  Press the Attribute Bank button (right hand side) for the

attribute you want to change.

4> Press [Delay] to set delay time or [Set fade] to set fade time.
5> Type the new time using the numeric keypad and press Enter to

save it, or press [Use Global] to delete the attribute times and

go back to the normal times.

6> Press Enter to save the changes.

You can take this even further and set individual fade times for each

fixture. When you select the cue to be changed, you will see that all

the fixtures in the cue are selected. To set attribute times for only

certain fixtures, change the fixture selection using the Swop buttons.
The Cue View window will display when editing cue timings to help

you see what you are editing. You can touch fixtures or attributes in

the grid to select which items are going to be edited.
Press the ALL button to select all fixtures in the cue.
When you are in the Set Attribute Times menu you can only select

fixtures which are in the cue you are editing.