avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
Page 80 – 7. Chases
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
and didn’t change the speed, size or phase of the shape from
the previous step; or if you Included the shape from the
previous step and have not modified it)
•
You can set a legend for the chase by pressing Set Legend,
then pressing the Swop button for the chase and entering the
legend, as with cues.
•
There is no limit to the number of steps in a chase.
7.2
Playback
7.2.1
Playing back a chase
To fire a chase, raise the fader of the playback. (You can also use the
Flash/Swop buttons). The chase
will start to run.
•
The HTP (intensity)
channels in the chase will
be controlled by the fader;
if fade times are
programmed, the fade will
stop at the fader level.
The other channels (LTP)
will be set as soon as the
fader moves above zero
according to the fade
times programmed in the
chase. You can set the
point at which the LTP
channels activate from the
User settings menu.
•
While the chase is
running, the lower left
area of the LCD screen
shows details of the chase steps.
•
You can temporarily pause the chase by pressing the Stop
button to the right of the wheels. Press Go to resume playback.
There are many options you can set to determine the way the chase
runs and these are described in the rest of this chapter.
7.2.2
Connecting a chase for control
When you fire a chase, the wheels and Stop/Go buttons are
automatically allocated to control the Speed and Crossfade of the
chase – this is called Connecting the chase. If you have more than
one chase running, you can choose which chase is connected to the
controls using the Connect button.
•
Connect a different chase to the controls by pressing the
Connect button (right of the wheels) then the Swop button of
the chase you want to control.
•
Disconnect a chase from the controls by double pressing the
Connect button.
•
You can turn off the “chase autoconnect” option in the User
Settings menu if you don’t want to connect to a chase when
you fire it. You will have to use the Connect button to control