avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
Page 82 – 7. Chases
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
Beats Per Minute (BPM). Press Avo and A [User Settings], then press
B [Tempo Units] to set the option to [Tempo Units Seconds] or
[Tempo Units Beats Per Minute (BPM)].
7.2.4
Manually controlling the steps of a chase
You can pause a chase, if the chase is connected to the wheels, by
pressing the Stop button next to the wheels. Press the red Go button
to resume playback of the chase.
While the chase is stopped you can use the ← and → buttons (below
While the chase is stopped you can use the ← and → buttons (below
the ML Menu button) to move to the next or previous step.
You can also configure the blue and grey buttons of the playback
You can also configure the blue and grey buttons of the playback
handle to be Stop and Go. This uses the Key Profiles function.
1> Turn the key to System and press [Key Profiles].
2> Press [Edit Profile] and then press the profile you want to edit
2> Press [Edit Profile] and then press the profile you want to edit
(normally this would be “Run” for run mode or “Program” for
program mode).
3> Press [Chases] then choose either the Blue key or the Grey key.
4> Select Go or Stop from the function menu. Then press Exit and
4> Select Go or Stop from the function menu. Then press Exit and
set the function for the other key if required.
5> Turn the key back to Program or Run to continue using the
console.
7.2.5
Changing chase direction
The arrow buttons to the right of the Connect button set the direction
of the connected chase. The ↔ double-ended arrow button sets
of the connected chase. The ↔ double-ended arrow button sets
“bounce” mode where the chase will run to the end then reverse. The
Review key sets the chase to Random.
7.2.6
Jumping to a step
You can jump directly to a step in a chase by pressing the Connect
button, then typing in the desired step number, then pressing Enter
or softkey A. Alternatively at the top level menu you can type the
step number then press Connect.
7.3
Edit
7.3.1
Opening a chase for editing
You can open a chase for editing by pressing Chase then the Swop
button of the chase. This does not affect any existing cues in the
chase. You can then save new cues at the end by pressing the Swop
button just like normal recording.
To see a list of the cues in the chase, use Playback view (press View
To see a list of the cues in the chase, use Playback view (press View
then the Swop button of the playback).
To edit any of the time settings in each cue, select the setting to be
To edit any of the time settings in each cue, select the setting to be
modified by touching or dragging in the grid, then use the softkey
options to change the setting.