avolites pearl expert titan 用户手册

Page 86 – 7. Chases

 

 

 

 

PearlExpertTitan_Man_v3.doc  29/03/2010 13:28:00 

 

• 

Press [Fixture Overlap] then enter 0-100 on the keypad to 

change how fixtures overlap in the cue. 100% (the normal 

setting) means all fixtures fade together. 0% means that the 

first fixture will finish its fade before the next one starts giving a 

“rolling” change across a range of fixtures. 50% means that the 

2

nd

 fixture will start fading when the first one is half way 

through its fade. The order of the fixtures is set by the order 

you selected them when the cue was saved; you can change 

the order using Unfold. 

Note:  From v3 software, [Cue Overlap] is no longer available in 

chases. Instead use a Cue List set to “Link With Previous” and 

set the Link Offset as desired – see section 8.6.2 on page 96). 

 

You can configure each cue in a chase to have its own timing 

information. You can use the Playback View window, or the Unfold 

function to set individual times for cues in chases. 
Using the Playback View 

window: