Bosch ndn-921 用户手册

100 en | Advanced Mode

FlexiDomeHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

The settings on this page are used to integrate the device into a 

network. Some changes only take effect after a reboot. In this 

case Set changes to Set and Reboot.

1.

Make the desired changes.

2.

Click Set and Reboot.

The device is rebooted and the changed settings are activated. 

If the IP address, subnet mask, or gateway address is changed, 

then the device is only available under the new addresses after 

the reboot.

If a DHCP server is employed in the network for the dynamic 

assignment of IP addresses, activate acceptance of IP 

addresses automatically assigned to the device.

Certain applications (VIDOS, Bosch Video Management System, 

Archive Player, Configuration Manager) use the IP address for 

the unique assignment of the device. If using these 

applications, the DHCP server must support the fixed 

assignment between IP address and MAC address, and must be 

appropriately set up so that, once an IP address is assigned, it 

is retained each time the system is rebooted.

Enter the desired IP address for the camera. The IP address 

must be valid for the network.

 >

 >

 >

 >

 >