Bosch ndn-921 用户手册

en | Advanced Mode

FlexiDomeHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

Configure the alarm triggers for the camera.

Select N.C. (Normally Closed) if the alarm is to be triggered by 

closing the contact.

Select N.O. (Normally Open) if the alarm is to be triggered by 

opening the contact.

Select None to disable the input.

Enter a name for the alarm input. This name can be displayed 

below the icon for the alarm input on the LIVEPAGE. (Do not 

use any special characters, for example &.)

Select the camera mode to switch to when alarm input 1 is 

triggered. 

See Section 9.6.8 Alarm Task Editor, page 97, for information on 

alarm actions based on alarm inputs.

Configure the switching behavior of the relay output. 

Select different events that automatically activate an output. 

For example, turn on a floodlight by triggering a motion alarm 

and then turn the light off again when the alarm has stopped.

Select Open for the relay to operate as an N.O. contact, or 

select Closed if the relay is to operate as an N.C. contact.

Select External device or Motion+/IVA to trigger the relay. 

 >

 >