Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 65 of 119
4.4.3 Management
Interface
Click
Management Interface
in the system menu (left side of screen) to view and edit
the IP address and DHCP settings.
Figure 29: Web: Configuration - Management Interface Screen
IP Parameters
Obtain IP Parameters from DHCP Server: Select this option to have the base station
obtain its IP address from a DHCP server.
Use the following IP Parameters: Select this option to manually enter the following IP
parameters:
obtain its IP address from a DHCP server.
Use the following IP Parameters: Select this option to manually enter the following IP
parameters:
IP Address: Enter the static base station network IP address.
Subnet Mask: Enter the base station subnet address mask.
Default Gateway: Enter the IP address of the default gateway on the local Ethernet
segment.
Time Server (SNTP): Enter the IP address of the SNTP server.
Use the following checklist to ensure correct display options:
1. Time server must be compatible with SNTP (RFC-2030)
2. Ensure the time zone is correct for your area.
3. If you are in an area that observes daylight savings time, check the box.
Time Zone: Enter the time offset from GMT (hours).
Daylight Savings: Check this box to enable automatic time change for daylight
savings.
Syslog Server: Enter the IP address of the Syslog server to enable this feature.
Subnet Mask: Enter the base station subnet address mask.
Default Gateway: Enter the IP address of the default gateway on the local Ethernet
segment.
Time Server (SNTP): Enter the IP address of the SNTP server.
Use the following checklist to ensure correct display options:
1. Time server must be compatible with SNTP (RFC-2030)
2. Ensure the time zone is correct for your area.
3. If you are in an area that observes daylight savings time, check the box.
Time Zone: Enter the time offset from GMT (hours).
Daylight Savings: Check this box to enable automatic time change for daylight
savings.
Syslog Server: Enter the IP address of the Syslog server to enable this feature.