Redline Communications Inc. AN100UA 用户手册

™

 

 

 

Doc. #70-00058-01-01 

Proprietary Redline Communications © 2007 

July 13, 2007 

Page 70 of 119

 

 

Click 

 in the menu (left side of screen) to upload a new system 

software image from a remote server. The terminal contains two non-volatile RAM banks 
for storing the software. Each upload overwrites the standby (unselected) bank. 

 

Protocol: Select the type of server: 

FTP: Use File Transfer Protocol for file upload. 
TFTP: Use Trivial File Transfer Protocol for file upload. TFTP is not available in the 
current software version. 

Server IP Address: Enter the FTP server network address. 
User: Enter the username of a user that is defined on the FTP server and has sufficient 
access rights to the base station software image file. 
Password: Enter the password for the username entered in the User field above. 
File Path: Enter the path and name of the system software image to upload. It is strongly 
recommended to copy the binary files to the default file directory for the FTP server and 
to specify only the file name in this field. 
Status: Monitors the software upload operation. 
Start Upgrade: Click  

Start Upgrade  

to begin the software upload. 

Version: Select the software image to load on the next system reset. 
Status: Monitors the system upgrade operation. 
Apply&Reset: Click  

Apply&Reset

  to save the current version selection.