Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 71 of 119
Before Beginning the Upgrade
Use the following procedures to upgrade the base station.
The following items must be addressed before beginning the upgrade:
1. You must obtain the latest base station binary files. You must copy the binary files
The following items must be addressed before beginning the upgrade:
1. You must obtain the latest base station binary files. You must copy the binary files
into the default file location for the FTP server. You can not specify a 'path' in the
upgrade dialog.
upgrade dialog.
2. The base station performs all software upgrades using an FTP server:
a) The FTP server must be located on the network connected to an active
Ethernet port (Data or Mgmt) on the base station.
b) The FTP server must have a user defined as follows:
username:
target
password:
secret
Upgrade Base Station
1. Start a Web browser session to the base station and login. The factory default
settings are as follows:
Login:
admin
Password:
admin
2. Click
Software Upgrade in the left-hand menu and make the following settings:
Protocol:
FTP
Server IP address: [enter address of FTP server]
User:
User:
target
Password: secret
File Path:
File Path:
[Enter binary file name -- including .bin extension]
3. Click Upgrade button and wait for the base station to download and save the binary
file. This process may take a few minutes. Progress is indicated in the Status field.
The Status Screen displays 'Update OK' when the upgrade is complete.
The Status Screen displays 'Update OK' when the upgrade is complete.
4. In the Software Upgrade screen, Click radio to select the new version of software.
Click Apply&Reset to activate the new software. Click Yes in the confirmation
dialog.
dialog.
Note: When the base station is reset, all traffic stops for about 30 seconds and then
resumes as the subscribers are registered.
resumes as the subscribers are registered.