Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 81 of 119
Table 24: CLI - Interfaces Command
Interface
Command
Parameter/Description
MacMaxDistance maximum distance to any subscriber
MacFrmDuration
0
--
2.5
1
--
4
2
--
5
3
--
8
4
--
10
5
--
12.5
6
--
20
MacSyncMode
0 -- NoSynch
1 -- Master with GPS Synch
2 -- Master
3 -- Slave
4 -- Backup Slave
MacAirInterfaceStatu - 0 -- disable RF; 1 -- enable RF
MacDLRatio
MacDLRatio
downlink ratio (25 - 80)
default restore all settings to factory default values
show
Display the general wireless configuration.
5.2.4 ipAddress
The ipAddress command is used to view and configure the base station IP address
parameters.
parameters.
Table 25: CLI - IP Address Command
Command
Parameter/Description
set
Modify the base station network IP settings.
Address: <IP Address>
Address: <IP Address>
Enter new IP address.
XXX.XXX.XXX.XXX
Mask: <IP Mask>
Mask: <IP Mask>
Enter new Netmask value.
XXX.XXX.XXX.XXX
Dhcp: Enable or disable DHCP support.
0:
Dhcp: Enable or disable DHCP support.
0:
- Static address
1:
- DHCP allocated address.
Gateway < Default gateway> Enter new gateway address. Requires
confirmation
confirmation
to
proceed.
show
Display all IP address information.