Testo testo 735-2 Digital Thermometer Pt100: -200 up to +800 ºC/Type K: -200 up to +1370 ºC 0563 7352 用户手册
产品代码
0563 7352
3
Press
/
to select the probe that is to be assigned to the chosen
channel no.
4
Assign the radio probe to the chosen channel no. with
or exit the
function with
, without changing the probe configuration..
Te-Type
The probe characteristic curves stored in the instrument can be set for the
probe type used.
The probe characteristic curves stored in the instrument can be set for the
probe type used.
²
Setting pprobe ttype:
The configuration menu is open, Config. is displayed.
1
Probe ¬
¬
Te-Type ¬
.
2
Select the desired probe type with
/
and confirm with
.
Adjustment (735-2 only)
The function is only available if probe adjustment data are stored in the
instrument. The PC adjustment software testo 735-2 is required to store probe
adjustment data in the instrument. See documentation on this software.
Probe adjustment data stored in the instrument can be activated/deactivated.
Information on the adjustment data can be displayed.
The function is only available if probe adjustment data are stored in the
instrument. The PC adjustment software testo 735-2 is required to store probe
adjustment data in the instrument. See documentation on this software.
Probe adjustment data stored in the instrument can be activated/deactivated.
Information on the adjustment data can be displayed.
²
Activating/deactivating aadjustment ddata:
The configuration menu is open, config. is displayed.
1
Probe ¬
¬
Adjustm. ¬
.
2
Select On or Off with
/
and confim with
.
3
If On is selected: With
/
, select the probe socket to which the
adjusted probe is connected, and confirm with
.
- The activated adjustment data are displayed for your information.
6.1.5 Language
²
Setting tthe llanguage:
The configuration menu is open, config. is displayed.
1
Language ¬
.
2
Select the desired language with
/
and confirm with
.
OK
OK
OK
OK
OK
OK
OK
OK
OK
ESC
OK
6. Setting the instrument
44