Bosch Appliances Home Security System LTC 8600 用户手册
LTC 8600 | LTC 8800 Series
en | 39
F.01U.127.393 | 2.0 | 2009.03
Instruction Manual
Bosch Security Systems, Inc.
Figure 12: Main Site Sample Program Showing Local Cameras, Trunk Lines and Remote Cam-
eras
NOTE
Either a local camera, or a remote camera programmed with a local title, will need
to be selected to view certain on-screen prompts or data during programming of the
main site via a system keyboard.
to be selected to view certain on-screen prompts or data during programming of the
main site via a system keyboard.
Once the system is programmed and configured, any unused monitor outputs
located at the main site should be selected to display a local camera via the system
keyboard. This prevents unused monitor outputs from using up trunk lines which
may result in some confusing operational responses.
located at the main site should be selected to display a local camera via the system
keyboard. This prevents unused monitor outputs from using up trunk lines which
may result in some confusing operational responses.
The “Start-up” camera numbers listed in the Monitor Table of the LTC 8059/00 soft-
ware should be programmed to specify locally connected cameras or a local unused
input (i.e., the raster generator will be displayed when called up). This table defines
the camera numbers that will automatically be switched to an operator's monitor in
the event the trunk line being used to display their original satellite camera is 'sto-
len' by an operator with a higher priority.
ware should be programmed to specify locally connected cameras or a local unused
input (i.e., the raster generator will be displayed when called up). This table defines
the camera numbers that will automatically be switched to an operator's monitor in
the event the trunk line being used to display their original satellite camera is 'sto-
len' by an operator with a higher priority.
Figure 13: Main Site Sample Program Showing Monitor Start-Up Camera Numbers