Bosch Appliances Home Security System ICP-CC404 用户手册

下载
页码 98
ICP-CC404 | Installation Guide | 8.0   Alarm Link Software 
 
 
Bosch Security Systems, Inc. | 12/08 | F01U089401-02 
39
 
If the control panel does not answer the call, the 
system might be armed already, remote functions are 
not enabled, or the Ring Count is set to 0. To enable 
remote arming by telephone, select Option 2 in 
Location 177 (refer to Section 12.1 Dialer Options 1 on 
page 50). To set the number of rings before the 
control panel answers, refer to Section 11.10 Ring 
Count
 on page 49. 
 
 
When both Remote Arming and 
Upload/Download are selected, the 
control panel answers the call expecting 
the remote computer. When this occurs, 
modem negotiating tones sound rather 
than the remote arming jingle. 
 
8.0   Alarm Link Software 
You can program or control the ICP-CC404 Control 
Panel remotely using an IBM or compatible personal 
computer and the CC816 Alarm Link Software. This 
software allows you to change your customer’s 
control panel without leaving your office, improving 
customer service and saving you time and money. 
For locations where a control panel is installed 
hundreds of kilometres from your office, the 
Upload/Download feature is invaluable. 
To use the Alarm Link Software with the ICP-CC404 
Control Panel, set the control panel type in the Alarm 
Link database to I404-V10
When adding a new customer in the Alarm Link 
Software, the Subscriber ID Number and the Installer 
Code must match the values programmed in the 
control panel for synchronisation when connecting to 
the control panel. If these two locations do not match 
those of the control panel, you cannot synchronize 
the computer and the control panel. 
8.1 Remote 
Connect 
The remote connect feature allows you to establish a 
connection through the telephone network from your 
IBM or compatible computer to the ICP-CC404 
Control Panel. This software allows you to offer faster 
service to your clients. 
8.1.1 
Remote Connect with Customer Control 
If you want to configure the control panel so a remote 
connection can only be established when the client 
initiates it through the remote codepad, program the 
following information: 
•  Program the Call Back Telephone Number in 
Locations 159 to 174 (refer to Section 11.9 on 
page 49). 
•  Disable Option 1 in Location 180 (refer to Section 
8.2 Alarm Link Options on page 40). 
The control panel is now set so the client controls 
when a remote connection can be established. 
 
To dial the remote computer: 
Press and hold [6] until two beeps sound on the 
remote codepad. 
8.1.2 
Remote Connect without Callback 
Verification 
Remote connect without callback verification is useful 
if you must perform Upload/Download functions 
from multiple locations.  
There are two methods to disable callback 
verification. Remember that using this feature reduces 
the security of the control panel. 
Method One 
Method one allows you to call the control panel from 
any remote location without the control panel calling 
back to the computer to establish a link. When using 
this method, the customer cannot initiate a modem 
call by holding down [6].  
To program method one: 
1.  Program Locations 159 to 174 for the Call Back 
Telephone Number to 0 (refer to Section 11.9 on 
page 49). 
2.  Select Option 1 and disable Option 2 in Location 
180 (refer to Section 8.2 Alarm Link Options on 
page 40). 
The control panel allows connecting the first call 
without calling the remote computer. 
Method Two 
Method two allows you to program a callback 
telephone number so the customer can still initiate a 
modem call when necessary. When you call the 
control panel from a remote location using the 
computer, the control panel does not call back the 
remote computer to establish a link.  
To program method two: 
1.  Program the Call Back Telephone Number in 
Locations 159 to 174 (refer to Section 11.9 on 
page 49). 
2.  Select Option 1 and disable Option 2 in Location 
180 (refer to Section 8.2 Alarm Link Options on 
page 40). 
The control panel allows connecting the first call 
without calling the remote computer to make contact 
and allows the customer to initiate a modem call by 
holding down [6]. 
8.1.3 
Remote Connect with Callback Verification 
Remote connect with callback verification offers the 
highest degree of data security through a two-level 
security check. 
In the first level, the Installer Code and the 
Subscriber ID Number must match those of the 
control panel. In the second level of security, the 
control panel calls the programmed callback 
telephone number to establish the valid connection.