Bosch Appliances Home Security System DS7400XIV4-EXP 用户手册

DS7400XiV4-EXP | User Guide | 10.0  

Testing Your System 

EN | 27 

 

 

Bosch Security Systems | 6/05 | 4998154961B 

 

10.0  Testing Your System 

10.1 Zone 

Test 

The zone test confirms that detectors report alarms to the keypad. A zone test works on all zones, except 24-hour 
zones and fire zones. While the keypad is in a zone test, no control panel alarms activate an alarm, except 24-hour 
zone alarms and fire alarms; these alarms override the zone test function. 

This test requires you to manually alarm each zone. 

At the start of the test, if programmed, a report is sent to the central station followed by reports on the individual 
zones as they are tested. When the zone test is complete, a test restoral report is sent to the central station. 

If you perform this test from a Master Keypad, the keypad must be in Single Partition Mode. Zone tests are not 
available from RF (wireless) keypads. 

 

 

 

Test the system weekly. 

 

Table 25: Zone Test 

 

 

 

 

Type of Test   Command Sequence 

What Happens 

What To Do 

Zone Test 

[PIN][#][8][1] 

•  “Test Zone” is displayed followed by the 

numbers of the zones that were not tested. * 

•  The zone LEDs of any untested zones flash. ** 

•  “Now Testing” is displayed followed by the 

number of the zone currently being tested. * 

•  The LED for the zone currently being tested 

turns on steady. ** 

•  As each zone is tested, “Test Zone” appears 

followed by the remaining untested zones. * 

•  As each zone is tested, its LED turns off. ** 

•  Test each zone as 

instructed by your 
installing company.  

•  Exit the Zone Test using 

[PIN][#]. 

* Text Keypad only 

** LED Keypad only