GE 82-POE 用户手册
Chapter 2: Installation
16
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Switch Installation
This section describes how to install the Managed Switch and connect it as
necessary. Please read the following instructions, and perform the procedures in the
listed order.
necessary. Please read the following instructions, and perform the procedures in the
listed order.
Desktop/Shelf Installation
NOTE:
Refer to the environmental restrictions listed in the Product Specification when
selecting a location for the Managed Switch.
Step 1: Attach the rubber feet to the recessed areas on the bottom of the Managed
Switch.
Step 2: Place the Managed Switch on a desktop or shelf near an AC power source, as
shown in Figure 5.
Step 3: Ensure there is enough ventilation space between the Managed Switch and
surrounding objects.
Switch.
Step 2: Place the Managed Switch on a desktop or shelf near an AC power source, as
shown in Figure 5.
Step 3: Ensure there is enough ventilation space between the Managed Switch and
surrounding objects.
Figure 5: Typical placement of GE-DS-82 on desktop