Toshiba D-R17DTKB 用户手册
22
EN
Digital Audio for Better Sound Quality
The connections illustrated above are
optional for better sound.
optional for better sound.
1
For clear digital sound quality, use
the DIGITAL AUDIO OUTPUT
(COAXIAL) jack to connect your
digital audio equipment.
the DIGITAL AUDIO OUTPUT
(COAXIAL) jack to connect your
digital audio equipment.
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
Connecting a Dolby Digital™ decoder, DTS
decoder or MPEG decoder
decoder or MPEG decoder
• Connecting multi-channel Dolby Digital decoder
allows you to enjoy the Multi-channel Dolby Digital
surround system as well as DTS decoder, Multi-
channel surround system.
surround system as well as DTS decoder, Multi-
channel surround system.
• After connecting to a Dolby Digital decoder, set
“Dolby Digital” to “Stream” in the Audio out menu.
(See page 72.)
(See page 72.)
• After connecting to a DTS decoder, set “DTS” to
“ON” in the Audio out menu. (See page 72.)
• After connecting to a MPEG decoder, set “MPEG” to
“Stream” in the Audio out menu. (See page 72.)
Connecting to an MD deck or DAT deck
• The audio source recorded in Dolby Digital Multi-
channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
an MD or DAT deck as a digital sound.
• If not connected to a Dolby Digital decoder, set
“Dolby Digital” to “PCM” in the Audio out menu.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
• Set “Dolby Digital” and “MPEG” to “PCM” and set
“DTS” to “OFF” in the Audio out menu for connecting
to an MD or DAT deck.
to an MD or DAT deck.
• You can use ANALOG AUDIO OUT jacks for the
connection of your audio system.
After You Have Completed
Connections
Connections
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the
Owner’s Manual of your TV.
external input channel. For details, refer to the
Owner’s Manual of your TV.
Note
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the effects of the copy protection system.
due to the effects of the copy protection system.
AV2 (DECODER)
AV1 (TV)
ANALOG
AUDIO OUT
COMPONENT
VIDEO OUTPUT
ANALOG
DVB-T
OUT
IN
ANTENNA
PB/CB
PR/CR
Y
L
R
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
HDMI OUT
COAXIAL
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
DTS decoder or
MPEG decoder, etc.
Digital audio
input jacks
Coaxial cable
(not supplied)
(not supplied)
E7J70BD_EN.book Page 22 Monday, May 7, 2007 3:31 PM