Bosch MVM-BVRM 用户手册

To configure a VRM system perform the following tasks:
–

–

–

–

–

–

–

–

–

–

Main window > Network tab
You add a VRM to the system to enable assigning storage devices and encoders to this VRM.
1.

Right-click the desired VRM and click Add to System....
The Add Device to System dialog box is displayed.

2.

In the Group list, select Configuration Manager.
The VRM is added to the system and is displayed on the Devices page.

Required configuration changes are performed automatically.

To configure a working iSCSI storage, you must add an iSCSI system and add LUNs.

Main window > Devices tab > Expand 

 > Right-click 

 Storage Systems > Add iSCSI

System... command > Add iSCSI System dialog box
1.

Enter the IP address of the iSCSI storage system.

2.

Select the type.
Configure the available device types (for example Bosch DLA and DSA (NetApp) storage
systems). Configure other types directly via the management software of the relevant
storage system.

3.

Enter the iSCSI storage system configuration password and confirm it.
The VRM system attempts to establish a connection with the device.

The device is added to the system and displayed in the tree structure.

Main window Devices tab > Expand 

 > Right-click desired 

 > Delete command

Main window > Devices tab > Expand 

 > Expand 

 Storage Systems > 

Add individual LUNs to the system and configure them.
You can add a backup LUN that has been used in another VRM system. If the backup LUN was
formatted with VRM 2.10 or later, it is automatically detected as a backup LUN.

en | Configuring a VRM system

Video Recording Manager

2012.05 | v1 | DOC

Software Manual

Bosch Sicherheitssysteme GmbH