Bosch MVM-BVRM 用户手册

下载
页码 42
The type of a LUN (standard/read-only/backup) is stored on the LUN itself, so if configuration
is lost, the LUN can be added without risk of data loss. The correct type of the LUN is read out
and is set correctly.
1.
Right-click an iSCSI system 
 and click LUN Assignment... to add new LUNs. The LUN
Assignment dialog box appears.
The left pane displays the LUNs that are available for this target and have not yet been
added to the system. The right pane displays the LUNs that have already been added to
the system.
2.
Drag a LUN from the left to the right pane to add it.
3.
Activate the Restore database option if you want to retain data when the LUN is added.
4.
Click OK.
The LUNs are added to the VRM system. The LUN Assignment dialog box is closed.
Removing Luns
To remove LUNs from the system, open the LUN Assignment dialog box and drag the LUNs in
question from the right to the left pane.
For the LUNs added to the system, make further settings if necessary.
Formatting LUNs
Main window > Devices tab > Expand 
 > Expand 
 Storage Systems > Expand 
 > 
Target Settings
You can format each added LUN. Formatting deletes all data on this LUN.
1.
In the Format column, select the corresponding check box for each LUN that you want to
format.
2.
Click Set to start formatting.
Configuring the LUN type
Main window > Devices tab > Expand > Expand 
 Storage Systems > Expand 
 >   >
Target Settings
You can configure the type of each added LUN. Some types require formatting of the LUN.
1.
In the Type list, select the corresponding item for each LUN that you want to configure.
2.
Click Set to start configuration.
Allocating detected devices
Main window > Tools menu > Device Allocator... command > Device Allocator dialog box
On devices allocated during recording the configuration changes are not performed as long as
recording is active. Perform the configuration changes after recording has stopped.
Note: When adding an encoder to the VRM, recording of this device stops automatically.
1.
Drag devices from the left pane on the VRM item on the right pane.
The encoder is now a child item of the VRM item.
2.
Click OK.
The encoders are allocated to the VRM system and are recorded.
Required configuration changes are performed automatically.
Authorizing an encoder permanently
Main window > Devices tab > Expand 
 > Expand 
Devices > 
 > General > Unit
Access tab
7.2.4
7.2.5
7.3
7.4
Video Recording Manager
Configuring a VRM system | en
15
Bosch Sicherheitssysteme GmbH
Software Manual
2012.05 | v1 | DOC