Toshiba IPedge IP Telephone 用户手册

45

The Call Park feature enables you to hold a call temporarily in a location other 
than your telephone. These areas are called orbits. You or another telephone 
user can retrieve a parked call from its orbit by specifying the orbit number. 
You can specify one of 20 General Park Orbits (7000~7019) or a valid 
extension number within the system.

Once you have parked a call in an orbit, you can:

Hang up and retrieve the parked call at a later time.

Originate another call.

Access a voice paging device to announce the parked call for pickup from 
another station.

If you park a call and it is not retrieved, it will recall to the parking station and 
one of the following occurs:

If your station is idle when the system Call Park recall timer expires, the 
parked call automatically recalls to your station.

If your station is busy, the parked call camps on.

If you have an LCD telephone, you can let the system automatically select an 
available orbit number which displays on your LCD.

1. While on a call, press Park in Orbit or press Cnf/Trn + #33. The LED 

flashes green (consultation-hold). If you were on an extension during the 
call, and you have line button on your telephone, the line LED will flash 
until the call is picked up (depending on programming).

2. Specify the Park Orbit using one of the following:

•

Press 

 and the system automatically selects a General Park 

Orbit between 7000~7019. The chosen orbit appears on the LCD.

•

Enter a valid extension.

•

Press # and the system automatically selects your extension as 
the orbit. 

3. Hang up. The caller’s extension or line number and the orbit number are 

shown. If the parked call is not retrieved within a specified time, the call 
rings back to your telephone. When a parked call recalls your telephone, 
the LCD shows the line or extension that is recalling and the orbit number.

1. Press Park in Orbit or press your extension button +

 #32.

2. Enter the Orbit Number where the call is parked or # for the extension 

from which you are calling. You cannot use 

 to retrieve a parked call. 

The extension LED flashes at the in-use rate when the call is retrieved.