Toshiba IPedge IP Telephone 用户手册

47

Call transfer allows a call to be directed from one telephone to another on 
IPedge Net. 

External transfers to telephone numbers or network extensions off IPedge Net 
are also supported, please check with your System Administrator to see if this 
is enabled.

There are two types of call transfer:

Blind transfer – The call is directly transferred to another extension 
without announcing the call or waiting to see if the caller is available.

Supervised transfer – The call is “supervised” during the transfer process 
so the call can be announced to the receiving party before completing the 
transfer. A supervised transfer also allows the person originating the 
transfer to take back or cancel the transfer.

1. While on a call, press the TRNS Soft Key. 

2. Dial the extension where you want to transfer the call.The call rings the 

destination station and your telephone returns to the idle state. If your 
telephone does not go idle, the destination may be located in a remote 
node, so you need to hang up to return to idle state.

For DN in remote node, the user can transfer by entering # after DN is 
entered.

1. While on a call, press 

Cnf/Trn. Your Line LED flashes green and you 

hear an internal dial tone.

2. Dial the extension where the call will be transferred. You can remain on 

the line and announce the call or hang up to complete a “blind transfer.”

If the privacy option has been disabled, then if you use a Line button 
when you transfer the call, the LED will flash red until the receiving 
party answers. While the LED is flashing, you can press the Line 
button to return to the call. If the receiving party answers the call, the 
LED turns solid red and you cannot reconnect to the original caller. 

During call transfer, you can connect all three parties by pressing the 

Cnf/Trn button or by pressing the JOIN soft key. This allows the 

three parties to talk together. 

3. Transfer with Camp On: If the station where you want to transfer the call is 

busy, you may hang up and the transferred trunk or station will be camped 
on to the busy destination.

1. While on a call, press 

Cnf/Trn.

2. Enter 

#407.

3. Enter the VM mailbox number (usually the same as the extension 

number) + 

#.

4. Hang up and the caller is connected to the VM mailbox. This feature does 

a blind transfer to VM.

1. While on a call, press 

Cnf/Trn.

2. Press the DSS button programmed to the voice mail number.

3. Hang up and the caller is connected to the VM mailbox.